The Cinedeck EXTREME undergoes a slimline name transformation and becomes the Cinedeck EX. Everything else remains the same for now. Whisper on the grapevine though is expect more than the name to change in the not too distant future with the newly named Cinedeck EX.


5″h – 8″w – 3.5″d (12.7cm x 20.3cm x 8.9cm); 4lbs (1.8kgs)
Rugged anodized aluminum enclosure and solid-state construction for extreme durability
Choice of Anton Bauer or Gold V-Mount battery mounts
Built-in wide input DC power: 12-30V via wall adapter or industry standard battery


Simultaneous pass thru of incoming signal for on-set/EVF monitoring
Realtime HD to SD downconvert for on-set monitoring
Realtime SD to HD upconvert
VGA display clone for secondary display with interface
Stereo headphone jack for audio monitoring


HD – 1080 50/60i
HD – 1080 23.98/24/25/29.97/30 P/PSF
HD – 1080 50/59.94/60 P/PSF (CineForm Only)
HD – 720 P 50/59.95/60
SI-2K Uncompressed 12-bit RAW 2K (via SI-2K Option)


Apple ProRes: 4444, 422 (HQ), 422, 422(LT), 422 (Proxy)
Avid DNxHD: 175/185/220x, 175/185/220, 115/120/145, 36/45 recording MXF OP-Atom or .MOV
CineForm: Filmscan1, Filmscan2, Keying, High, Medium, Low
CineForm Neo (via Stereoscopic Option for 3D)
Uncompressed 444 (10-bit) or 422 (8 or 10-bit) recording .MOV


Large 7″ high-res (1024-600) touchscreen display for realtime preview, focus, and review. 250 NITS brightness standard (1000 NITS Hi-Brite option available and recommended for direct sunlight environments)
Realtime composite and per-channel waveform, vectorscope and histogram for accurate quality control; available in overlay or full screen mode
On-screen reticle overlays: grids, crosshairs, safe frames, metadata, and letterboxing (opaque mask mode available)
Intuitive gestural touchscreen interface designed for field recording… most commonly used controls are also accessible via physical buttons on the front panel; most overlay functions available during record


Realtime upconvert/downconvert/crossconvert between more than a dozen resolution/frame rate combinations
Battery meter; disk capacity warning tally for peace of mind
SDI Link or internally generated timecode support on ingest with on-screen timecode display and programmable offset/start values
EXSync timecode module for jamsync to external clock source (HW option)
Garmin GPS data support
Long distance remote operation via ethernet or WiFi
Battery life: up to 1.5 hours continuous recording time on a single 1.5 Li-ion battery, up to 5 hours with stacked IDX Endura Elite or equivalent
16 1/4″ and 3/8″ threaded mounting points top and bottom for flexbility

See Cinedeck for more information.

Leave a Comment Here