FLUOTEC´s powerful new LED Fresnels are now available all over the world

AuraLux and VegaLux: The new powerful StudioLED Fresnels by FLUOTEC

Advancements on research and engineering allowed this new generation of LED Fresnels by FLUOTEC to be brighter and more efficient than its previous models.

This exciting development is important to Cinematographers, Producers, Gaffers, Photographers, and Film & Televisión Studio Executives, because until now, the use of inefficient incandescent tungsten lighting, has been the norm in Production Lighting for Studios, Locations, Stages and Theaters. Fresnels are workhorses of stage lighting and the most common luminaire used on television and motion pictures.

Fluotec Fresnels

These new Fresnels by FLUOTEC, will save producers and studios thousands of dollars on electrical bills, and at the same time provide
the specialized pure white light needed for professional applications.

Fluotec Lights

FLUOTEC´s new NEBULA Diffusion Chamber Technology, mixes and homogenizes the light, allowing the focusable beam to emit a pure white beautiful light, specially designed for Broadcast & Motion Picture applications.

The 5″ Manual Zoom AURALUX and the 7″ Motorized Zoom VEGALUX are part of FLUOTEC’s campaign to replace the inefficient Tungsten Fresnels with new, more powerful, efficient and accurate, LED technology Fresnels.

Fluotec 3

FLUOTEC´s LED technology is digital, and has DMX control over the brightness and in the case of the VEGALUX of the beam angle.

Fluotec 4

FLUOTEC’s VEGALUX and AURALUX fresnels are extremely efficient and powerful, capable of emitting a luminous flux equivalent to that of tungsten lights with power requirements of 1000w and 650w, respectively, while using only a portion of the same power draw.

At 180W for the VEGALUX Fresnel, and 146W for the AURALUX, you can actually have up to 10 lights connected to a 20A, 120VAC house outlet without breaking a fuse compared to two 1,000W or three 650W inefficient incandescent fixtures.

Fluotec 5

Fresnel lights are known for their special capability of changing the beam angle from flood to spot, FLUOTEC´s Fresnels have an impressive range of 12-50° for the AURALUX and 13-50° for the VEGALUX. The beam angle zoom can be changed in the VEGALUX via its DMX control, or manually in the case of the AURALUX.

Fluotec 6

FLUOTEC’s fixtures are built according to industry standards, and are simple to use, meaning they can be seamlessly integrated into your production’s workflow.

FLUOTEC´s Fresnel light is the pure white light needed for professional applications, so you can substitute your inefficient tungsten fixtures right away.

You will also save precious working costs because there is no need to move them while putting scrims, or need to re-rig them in the high grids of television studios because their brightness can be controlled through their 0-100% DMX remote or on-board dimming control panel.

FLUOTEC´s Fresnels are available in warm color temperatures of Tungsten 3200K or cold white DAYLIGHT 5600K versions.

Fluotec 7

They have the proprietary HALODIM (TM) control algorithm for a step less on-board control panel or remote DMX intensity control.

In broadcast television or motion picture studios, the motorized zoom for changing the beam angle of the VEGALUX (TM) can also be controlled via DMX.

Fluotec 8

All FLUOTEC´s Fresnels include 8 Blade Barndoors for accurate control of the light beam.

Fluotec 9

They are extremely silent and have an optimized passive and active cooling system with very quiet fans for studio or location applications.

The VEGALUX 7″ Motorized Zoom Fresnel draws only 180W, the equivalent of a small household lighting bulb, but yields an impressive 1,000W equivalent tungsten output, this efficient lighting fixtures will save between 75-80% of the cost of your electric bill, and because LED is a cool light, you will also save costs, eliminating the need of air conditioning for your studio.

For more information please see Fluotec.

Leave a Comment Here